Skip Navigation
Skip to contents

eTSNE

로그인 후 이용해주시기 바랍니다.

메뉴 닫기
검색
#TES2024 #ANZINE #광학 #시스템 #전자기장 #유동 #구조

자료보기

Home

전문자료실
자료보기
[설치관련] What CAD systems and operating systems does CETOL support?

[설치관련] What CAD systems and operating systems does CETOL support?

이 문서는 CETOL 6σ 응용 프로그램의 최신 릴리스에 지원되는 플랫폼을 나열합니다.
  • topic자료형식 PDF / TXT
  • person담당자 마케팅팀 (marketing@tsne.co.kr)
thumb_up 좋아요 0 bookmark_add 스크랩 0
자료 다운로드 전체 다운로드
㈜태성에스엔이에서 제공하는 모든 콘텐츠는 관련 법의 보호를 받습니다.
저작권은 소프트웨어 공급사와 ㈜태성에스엔이에 있으며 콘텐츠의 무단 복사,배포,편집을 금합니다.
교육상세정보

상세정보

이 문서는 CETOL 6σ 응용 프로그램의 최신 릴리스에 지원되는 플랫폼을 나열합니다.
[설치관련] What CAD systems and operating systems does CETOL support?

CETOL 6σ Supported Platforms

This document lists the supported platforms for the most recent releases of the CETOL 6σ application.

 CETOL 6σ v10.4.0

Following are the CAD systems and operating system levels required to run the CETOL 6σ v10.4.0 client software. This table applies only to x64-based workstations.

CETOL ReleaseSupported CAD SystemSupported OS
CETOL 6σ for NX1Unigraphics V11.0 to NX 12.0
and up to 1899 series		Windows 8.1 64-bit
Windows 10 64-bit
CETOL 6σ for CATIA1CATIA V5-6 up to V5-6 R2020Windows 8.1 64-bit
Windows 10 64-bit
CETOL 6σ for Creo2Creo Parametric 4.0 M030Windows 8.1 (64-bit)
Windows 10 (64-bit)
Creo Parametric 5.0.0.0Windows 8.1 (64-bit)
Windows 10 (64-bit)
Creo Parametric 6.0.0.0Windows 8.1 (64-bit)
Windows 10 (64-bit)
Creo Parametric 7.0.0.0Windows 10 (64-bit)
CETOL 6σ for SOLIDWORKS2SOLIDWORKS 2018 SP0.1Windows 10 (64-bit)
SOLIDWORKS 2019 SP0Windows 10 (64-bit)
SOLIDWORKS 2020 SP0Windows 10 (64-bit)

Notes:

  1. Access to specific model types is controlled by license options.
  2. The specified CAD System shows the release and datecode or service pack that was used for testing and certification purposes. CETOL is generally compatible with later datecodes or service packs within the specified release. Using CETOL 6σ v10.4.0 with an older datecode or service pack than specified in the table may be possible but is not recommended.

CETOL 6σ v10.3.1

Following are the CAD systems and operating system levels required to run the CETOL 6σ v10.3.1 client software. This table applies only to x64-based workstations.

CETOL ReleaseSupported CAD SystemSupported OS
CETOL 6σ for NX1Unigraphics V11.0 to NX 12.0
and up to 1872
Windows 8.1 64-bit
Windows 10 64-bit
CETOL 6σ for CATIA1CATIA V5-6 up to V5-6 R2019
Windows 8.1 64-bit
Windows 10 64-bit

Notes:

  1. Access to specific model types is controlled by license options.

CETOL 6σ v10.3.0

Following are the CAD systems and operating system levels required to run the CETOL 6σ v10.3.0 client software. This table applies only to x64-based workstations.

CETOL ReleaseSupported CAD SystemSupported OS
CETOL 6σ for NX1Unigraphics V11.0 to NX 12.0
and up to 1847 series
Windows 7 SP1 64-bit
Windows 8.1 64-bit
Windows 10 64-bit
CETOL 6σ for CATIA1CATIA V5-6 up to V5-6 R2019
Windows 7 SP1 64-bit
Windows 8.1 64-bit
Windows 10 64-bit
CETOL 6σ for Creo2Creo Parametric 4.0 M030Windows 7 SP1 (64-bit)
Windows 8.1 (64-bit)
Windows 10 (64-bit)
Creo Parametric 5.0.0.0Windows 7 SP1 (64-bit)
Windows 8.1 (64-bit)
Windows 10 (64-bit)
Creo Parametric 6.0.0.0Windows 7 SP1 (64-bit)
Windows 8.1 (64-bit)
Windows 10 (64-bit)
CETOL 6σ for SOLIDWORKS2SOLIDWORKS 2018 SP0.1Windows 7 SP1 (64-bit)
Windows 8.1 (64-bit)
Windows 10 (64-bit)
SOLIDWORKS 2019 SP0Windows 7 SP1 (64-bit)
Windows 10 (64-bit)
SOLIDWORKS 2020 SP0Windows 7 SP1 (64-bit)
Windows 10 (64-bit)

Notes:

  1. Access to specific model types is controlled by license options.
  2. The specified CAD System shows the release and datecode or service pack that was used for testing and certification purposes. CETOL is generally compatible with later datecodes or service packs within the specified release. Using CETOL 6σ v10.3.0 with an older datecode or service pack than specified in the table may be possible but is not recommended.

CETOL 6σ v10.2.3

Following are the CAD systems and operating system levels required to run the CETOL 6σ v10.2.3 client software. This table applies only to x64-based workstations.

CETOL ReleaseSupported CAD SystemSupported OS
CETOL 6σ for NX1Unigraphics V11.0 to NX 12.0Windows 7 SP1 64-bit
Windows 8.1 64-bit
Windows 10 64-bit
CETOL 6σ for CATIA1CATIA V5-6 up to V5-6 R2018
Windows 7 SP1 64-bit
Windows 8.1 64-bit
Windows 10 64-bit

Notes:

  1. Access to specific model types is controlled by license options.

CETOL 6σ v10.2.2

Following are the CAD systems and operating system levels required to run the CETOL 6σ v10.2.2 client software. This table applies only to x64-based workstations.

CETOL ReleaseSupported CAD SystemSupported OS
CETOL 6σ for Creo1Creo Parametric 4.0 M010Windows 7 SP1 (64-bit)
Windows 8.1 (64-bit)
Windows 10 (64-bit)
Creo Parametric 5.0.0.0Windows 7 SP1 (64-bit)
Windows 8.1 (64-bit)
Windows 10 (64-bit)
Creo Parametric 6.0.0.0Windows 7 SP1 (64-bit)
Windows 8.1 (64-bit)
Windows 10 (64-bit)
CETOL 6σ for SOLIDWORKS1SOLIDWORKS 2017 SP 3.0Windows 7 SP1 (64-bit)
Windows 8.1 (64-bit)
Windows 10 (64-bit)
SOLIDWORKS 2018 SP 0.1Windows 7 SP1 (64-bit)
Windows 8.1 (64-bit)
Windows 10 (64-bit)
SOLIDWORKS 2019 SP 0.0Windows 7 SP1 (64-bit)
Windows 10 (64-bit)

Notes:

  1. The specified CAD System shows the release and datecode or service pack that was used for testing and certification purposes. CETOL is generally compatible with later datecodes or service packs within the specified release. Using CETOL 6σ v10.2.2 with an older datecode or service pack than specified in the table may be possible but is not recommended.

CETOL 6σ v10.2.1

Following are the CAD systems and operating system levels required to run the CETOL 6σ v10.2.1 client software. This table applies only to x64-based workstations.

CETOL ReleaseSupported CAD SystemSupported OS
CETOL 6σ for NX1Unigraphics V11.0 to NX 12.0Windows 7 SP1 64-bit
Windows 8.1 64-bit
Windows 10 64-bit
CETOL 6σ for CATIA1CATIA V5-6 up to V5-6 R2018 (R28)Windows 7 SP1 64-bit
Windows 8.1 64-bit
Windows 10 64-bit
CETOL 6σ for Creo2Creo Parametric 4.0 M010Windows 7 SP1 (64-bit)
Windows 8.1 (64-bit)
Windows 10 (64-bit)
Creo Parametric 5.0.0.0Windows 7 SP1 (64-bit)
Windows 8.1 (64-bit)
Windows 10 (64-bit)
CETOL 6σ for SOLIDWORKS2SOLIDWORKS 2017 SP 3.0Windows 7 SP1 (64-bit)
Windows 8.1 (64-bit)
Windows 10 (64-bit)
SOLIDWORKS 2018 SP 0.1Windows 7 SP1 (64-bit)
Windows 8.1 (64-bit)
Windows 10 (64-bit)
SOLIDWORKS 2019 SP 0.0Windows 7 SP1 (64-bit)
Windows 10 (64-bit)

Notes:

  1. Access to specific model types is controlled by license options.
  2. The specified CAD System shows the release and datecode or service pack that was used for testing and certification purposes. CETOL is generally compatible with later datecodes or service packs within the specified release. Using CETOL 6σ v10.2.1 with an older datecode or service pack than specified in the table may be possible but is not recommended.

CETOL 6σ v10.2.0

Following are the CAD systems and operating system levels required to run the CETOL 6σ v10.2.0 client software. This table applies only to x64-based workstations.

CETOL ReleaseSupported CAD SystemSupported OS
CETOL 6σ for NX1Unigraphics V11.0 to NX 12.0Windows 7 SP1 64-bit
Windows 8.1 64-bit
Windows 10 64-bit
CETOL 6σ for CATIA1CATIA V5-6 up to V5-6 R2018 (R28)Windows 7 SP1 64-bit
Windows 8.1 64-bit
Windows 10 64-bit
CETOL 6σ for Creo2Creo Parametric 4.0 M010Windows 7 SP1 (64-bit)
Windows 8.1 (64-bit)
Windows 10 (64-bit)
Creo Parametric 5.0.0.0Windows 7 SP1 (64-bit)
Windows 8.1 (64-bit)
Windows 10 (64-bit)
CETOL 6σ for SOLIDWORKS2SOLIDWORKS 2017 SP 3.0Windows 7 SP1 (64-bit)
Windows 8.1 (64-bit)
Windows 10 (64-bit)
SOLIDWORKS 2018 SP 0.1Windows 7 SP1 (64-bit)
Windows 8.1 (64-bit)
Windows 10 (64-bit)

Notes:

  1. Access to specific model types is controlled by license options.
  2. The specified CAD System shows the release and datecode or service pack that was used for testing and certification purposes. CETOL is generally compatible with later datecodes or service packs within the specified release. Using CETOL 6σ v10.2.0 with an older datecode or service pack than specified in the table may be possible but is not recommended.

CETOL 6σ v10.1.0

Following are the CAD systems and operating system levels required to run the CETOL 6σ v10.1.0 client software. This table applies only to x64-based workstations.

CETOL ReleaseSupported CAD SystemSupported OS
CETOL 6σ for NX1Unigraphics V11.0 to NX 11.0Windows 7 SP1 (64-bit)
Windows 8.1 (64-bit)
Windows 10 (64-bit)
CETOL 6σ for CATIA1CATIA V5-6 up to V5-6 R2017 (R27)Windows 7 SP1 (64-bit)
Windows 8.1 (64-bit)
Windows 10 (64-bit)
CETOL 6σ for CreoNot Released
CETOL 6σ for SOLIDWORKSNot Released

Notes:

  1. Access to specific model types is controlled by license options.

CETOL 6σ v10.0.0

Following are the CAD systems and operating system levels required to run the CETOL 6σ v10.1.0 client software. This table applies only to x64-based workstations.

CETOL ReleaseSupported CAD SystemSupported OS
CETOL 6σ for NXUnigraphics V11.0 to NX 11.0Windows 7 SP1 (64-bit)
Windows 8.1 (64-bit)
Windows 10 (64-bit)
CETOL 6σ for CreoNot Released
CETOL 6σ for SOLIDWORKSNot Released

 

CETOL 6σ v9.1.1

Following are the CAD systems and operating system levels required to run the CETOL 6σ v9.1.1 client software. This table applies only to x64-based workstations.

CETOL ReleaseSupported CAD System1Supported OS
CETOL 6σ for Creo2Creo Parametric 2.0 M200Windows 7 SP1 (64-bit)
Windows 8.1 (64-bit)
Windows 10 (64-bit)
Creo Parametric 3.0 M080Windows 7 SP1 (64-bit)
Windows 8.1 (64-bit)
Windows 10 (64-bit)
Creo Parametric 4.0 F000Windows 7 SP1 (64-bit)
Windows 8.1 (64-bit)
Windows 10 (64-bit)
CETOL 6σ for SOLIDWORKSSOLIDWORKS 2016 SP 1.0Windows 7 SP1 (64-bit)
Windows 8.1 (64-bit)
Windows 10 (64-bit)
SOLIDWORKS 2017 SP 1.0Windows 7 SP1 (64-bit)
Windows 8.1 (64-bit)
Windows 10 (64-bit)
SOLIDWORKS 2018 SP 0.1Windows 7 SP1 (64-bit)
Windows 8.1 (64-bit)
Windows 10 (64-bit)

Notes:

  1. The specified CAD System shows the release and datecode or service pack that was used for testing and certification purposes. CETOL is generally compatible with later datecodes or service packs within the specified release. Using CETOL 6σ v9.1.1 with an older datecode or service pack than specified in the table may be possible but is not recommended.
  2. There are separate installers for Creo Parametric 2.0, 3.0 and for Creo Parametric 4.0.

 CETOL 6σ v9.1.0

Following are the CAD systems and operating system levels required to run the CETOL 6σ v9.1.0 client software. This table applies only to x64-based workstations.

CETOL ReleaseSupported CAD System1Supported OS
CETOL 6σ for Creo2Creo Parametric 2.0 M200Windows 7 SP1 (64-bit)
Windows 8.1 (64-bit)
Windows 10 (64-bit)
Creo Parametric 3.0 M080Windows 7 SP1 (64-bit)
Windows 8.1 (64-bit)
Windows 10 (64-bit)
Creo Parametric 4.0 F000Windows 7 SP1 (64-bit)
Windows 8.1 (64-bit)
Windows 10 (64-bit)
CETOL 6σ for SOLIDWORKSSOLIDWORKS 2016 SP1Windows 7 SP1 (64-bit)
Windows 8.1 (64-bit)
Windows 10 (64-bit)
SOLIDWORKS 2017 SP0Windows 7 SP1 (64-bit)
Windows 8.1 (64-bit)
Windows 10 (64-bit)

Notes:

  1. The specified CAD System shows the release and datecode or service pack that was used for testing and certification purposes. CETOL is generally compatible with later datecodes or service packs within the specified release. Using CETOL 6σ v9.1.0 with an older datecode or service pack than specified in the table may be possible but is not recommended.
  2. There are separate installers for Creo Parametric 2.0, 3.0 and for Creo Parametric 4.0.

CETOL 6σ v9.0.1

Following are the CAD systems and operating system levels required to run the CETOL 6σ v9.0.1 client software. This table applies only to x64-based workstations.

CETOL ReleaseSupported CAD System1Supported OS
CETOL 6σ for CreoCreo Parametric 2.0 M100Windows 7 SP1 (64-bit)
Windows 8.1 (64-bit)
Creo Parametric 3.0 M0602Windows 7 SP1 (64-bit)
Windows 8.1 (64-bit)
Windows 10 (64-bit)
CETOL 6σ for SOLIDWORKSSOLIDWORKS 2014 SP1Windows 7 SP1 (64-bit)
Windows 8.1 (64-bit)
SOLIDWORKS 2015 SP5Windows 7 SP1 (64-bit)
Windows 8.1 (64-bit)
SOLIDWORKS 2016 SP1Windows 7 SP1 (64-bit)
Windows 8.1 (64-bit)
Windows 10 (64-bit)

Notes:

  1. The specified CAD System shows the release and datecode or service pack that was used for testing and certification purposes. CETOL is generally compatible with later datecodes or service packs within the specified release. Using CETOL 6σ v9.0.1 with an older datecode or service pack than specified in the table may be possible but is not recommended.
  2. Due to a PTC API bug, the application will cause Creo to crash when importing size dimensions for certain features. This bug is fixed in Creo Parametric 2.0 M200 and 3.0 M080.

CETOL 6σ v9.0.0

Following are the CAD systems and operating system levels required to run the CETOL 6σ v9.0.0 client software. This table applies only to x64-based workstations.

CETOL ReleaseSupported CAD System1Supported OS
CETOL 6σ for CreoCreo Parametric 2.0 M100Windows 7 SP1 (64-bit)
Windows 8.1 (64-bit)
Creo Parametric 3.0 F0002Windows 7 SP1 (64-bit)
Windows 8.1 (64-bit)
Windows 10 (64-bit)
CETOL 6σ for SOLIDWORKSSOLIDWORKS 2014 SP1Windows 7 SP1 (64-bit)
Windows 8.1 (64-bit)
SOLIDWORKS 2015 SP5Windows 7 SP1 (64-bit)
Windows 8.1 (64-bit)
SOLIDWORKS 2016 SP1Windows 7 SP1 (64-bit)
Windows 8.1 (64-bit)
Windows 10 (64-bit)

목록으로 돌아가기
eTSNE㈜태성에스엔이
  • 대표이사 : 심진욱, 박인규
  • 사업자등록번호 : 219-81-23192
  • 통신판매업 신고번호 : 제2017-서울성동-1100호
04780 서울시 성동구 성수이로7길 27 서울숲코오롱디지털타워 2차 10층

ⓒ TAE SUNG S&E Inc.

  • 태성 유튜브 채널
  • 태성 네이버 카페
  • 태성 네이버 블로그
  • 카카오톡 채널
  • 태성 링크드인
Family Site